Epoxy Putty Stick for underwater repair

Epoxy Putty Stick for underwater repair 1.The ultimate solution for small or emergency repairs 2.Easy-to-use and mistake-proof

Epoxy Putty Stick for underwater repair

AquaMend Underwater Repair Epoxy Putty Stick

Product Description:

AquaMend is a hand-mixable, specialty epoxy putty for repairs to

damp, wet areas and underwater surfaces. After mixing, it forms a

polymer compound that may be applied underwater (either fresh or

salt water) and will bond tenaciously to substrates such as fiberglass,

concrete, glass, ceramic, metal, wood, and many plastics. Each stick

contains pre-measured portions of activator and base throughout —

no measuring or mixing tools are necessary. The consistency (like

modeling clay) eliminates drips and runs, facilitates adhesion to the

substrate, and allows the material to be shaped and formed as needed

before curing begins. After 60 minutes the application can be drilled,

sawed, sanded, carved, and painted. AquaMend cures to an off-white

color. Suitable for interior or exterior use, it is resistant to chemicals,

water, and temperature extremes. AquaMend contains no solvents

or VOCs. It is non-flammable and releases no noxious fumes. It won't

shrink or pull away. The unused portion stays fresh for future use

when saved in its original package.

Performance Data*:

SHELF STABILITY AT 75°F (24°C), minimum 24 months

SHORE D HARDNESS AT FULL CURE (24 hrs) 70

LAP SHEAR TENSILE STRENGTH

On steel (1" x 1" x 1/16") 900 lbs (6.2 MPa)

On fiberglass (1" x 1" x 1/16") 500 lbs (3.5 MPa)

COMPRESSIVE STRENGTH 8,000 psi (55 MPa)

DENSITY 15.8 lb/gal, 1.9 gm/cm3)

SHRINKAGE <1%

NON-VOLATILE CONTENT 100%

ELECTRICAL RESISTANCE 30,000 megohms

DIELECTRIC STRENGTH 300 volts/mil

UPPER TEMPERATURE LIMITS

Continuous 250°F (121°C)

Intermittent 300°F (149°C)

CHEMICAL RESISTANCE

Resistant to hydrocarbons, ketones, alcohols, esters,

halocarbons, aqueous salt solutions and dilute acids

and bases.

Epoxy Putty Stick for underwater repair